pad



F-89 Heavy Duty Scraper For Year Round Maintenance

The Model F-89 has been tested and proven under the severest conditions by men experienced in the truck scraper field. It has been designed with three aims in mind: first, to provide a strong, rugged piece of equipment which would stand up under the most strenuous treatment down through the years; second, to provide a scraper which would be adaptable to different makes and types of trucks; and most important, to design a scraper which can be easily serviced and maintained in the field. The new F-89 has more than fulfilled these requirements.

  • Channel hangers
  • 1" solid circle with 20.5" clamps
  • 1" grader type moldboard
  • 2 1/2" hinge shaft
  • Full length bearing
  • Greasable thrust blocks on the end hinges
F-89 detail
Note the large amount of material that can be handled with large 1" grader type moldboard.

SPECIFICATIONS*
Unit size:10' (3.04m), 11' (3.35m) or 12' (3.65m)
Hangerboard:Minimum of 10" (25cm) x 30 lb. Structural channel reinforced by 1/2" (1.26cm) x 8" (20cm) plate and by 4" (10cm) S&C 13.8 lb. Channel the entire length of hinge line with a center bolt bushing.
Hinge line:Solid, 96" linear inches (2.43m) minimum, 660 square inches (.425m squared) of bearing surface area.
Hinge shaft:2 1/2" (6cm) O.D. carbon steel.
Moldboard size:1" (2cm) thick x 20" (50cm) wide, heat treated carbon steel.
Moldboard shock absorption:Cusioned by 2 heavy duty Root patented cushion spring shock absorber assemblies.
Moldboard actuation:2 - 3" (7.61cm) double acting cylinders with nitrated piston rods, mounted horizontally on the scraper by 3/4" (1.9cm) thick reinforced steel trunnion brackets.
Trunnion bearings:2" (5cm) O.D. x 1 1/4" (3.15cm) carbon steel.
Circle:Minimum of 1" (2cm) thick solid steel 1 pc. design with 4 independent heavy duty mounting legs, of 4" (10cm) S&C channel 13.8 pound per foot.
Power reverse:Dual cylinder power reverse with 2 - 4" (10cm) double acting cylinders.
Reverse cylinder:Rod clevis bosses to be of 2" (5cm) O.D. carbon steel, solid welded to the top and bottom of the hangerboard.
Positions:Scraper has 7 plowing positions.
Approx. plow weight:10' (2000 lbs.) or 11' (2100 lbs.)
* Measurements are approximate. Specifications subject to change without notice.

Optional end bits and abrasion resistant circle. All moving parts on scraper zerk equipped.



Root Spring Scraper Co.
527 W. North St.
Kalamazoo, MI 49007
269-382-2025
800-333-ROOT
269-382-5920 Fax
salesteam@rootsnowplows.com