Model:  GW 52  GW 72 
Moldboard Lengths:  10' (3.04m) or 11' (3.35m) or 12' (3.65m)  10' (3.04m) or 11' (3.35m) or 12' (3.65m) 
Height:  Tip 42"/39 1/2" (1.06m/1m) Center  56"/52" (1.42m/1.32m) Center 
Vertical Ribs:  9  1/2" x 3" (1.26cm x 7.62cm)  9  3/8" x 3" (.95cm x 7.62cm) 
Width of Cut  28 degrees:  For 10'  8'10" (2.69m); For 11'  9'8" (2.94m); For 12'  10'6" (3.20m)  For 10'  8'10" (2.69m); For 11'  9'8" (2.94m); For 12'  10'6" (3.20m) 
Width of Cut  35 degrees:  For 10'  8'2" (2.48m); For 11'  9'0" (2.74m) ; For 12'  9'10" (2.99m)  For 10'  8'2" (2.48m); For 11'  9'0" (2.74m); For 12'  9'10" (2.99m) 
Width of Cut  42 degrees:  For 10'  7'5" (2.26m); For 11'  8'2" (2.48m) ; For 12'  8'11" (2.71m)  For 10'  7'5" (2.26m); For 11'  8'2" (2.48m); For 12'  8'11" (2.71m) 
Moldboard/Deflector Material:  10ga./12ga. (.217cm/.265cm)  10ga./12ga. (.217cm/.265cm) 
Cutting edge:  1/2" x 6" (1.3cm x 15.2cm)  1/2" x 6" (1.3cm x 15.2cm) 
Lift:  10" (25cm)  12" (30.4cm)  10" (25cm)  12" (30.4cm) 
Trip Spring:  2  2 
Recommended Truck Size:  2 1/2 Ton (2270kg) and up  3 Ton (2724kg) and up 
Hinge Points and Size:  41" (2.53cm)  41" (2.53cm) 
Outside Hinge Spread:  85" (2.15m)  85" (2.15m) 
Caster Wheel Size (optional):  16" (40cm) Pneumatic Standard  16" (40cm) Pneumatic Standard

Size Semicircle Angle:

4” (10cm)square tubing with 4”X4”X1/2” angle  4” (10cm)square tubing with 4”X4”X1/2” angle 
Moldboard Bottom Angle:  4" x 4" x 3/4" (10cm x 10cm x 1.9cm) boxed  4" x 4" x 3/4" (10cm x 10cm x 1.9cm) boxed 
Top Moldboard Stiffener:  SPEC Formed  SPEC Formed 
Weight Plow Only:  10' (3.05m)  2100 lbs. (953kg) or 11' (3.35m)  2200 lbs. (998kg) or 12' (3.65m)  2300 lbs. (1057kg)  10' (3.05m)  2200 lbs. (1007kg) or 11' (3.35m)  2320 lbs. (1053kg) or 12' (3.65m)  2450 lbs. (1112kg) 
Weight Truck Hitch:  400lbs. (181kg)  400lbs. (181kg) 
2Cyl. P. Reverse 4" Cyl.:  Standard  Standard 